Custom made clutch-back pins.

Custom shaped, flat, laser-cut acrylic pins with printed artwork sealed on the reverse and a soft PVC clutch - available in 2 different designs.

Each button badge is mounted onto a custom printed card.

Two Designs:

- All You Need is Fuzz (31mm x31mm)
- Tone Spirit (26mm x 31mm)

Each custom pin includes a protective film on the front to prevent scratching - please remove this before wearing.

A clear laminate protects the back of the pin and helps reduce chipping. The backside laminate should not be removed.

If you have difficulty peeling the film, we recommend trying one of these methods:

- Rub your finger on the edge to help loosen it.
- Use a hairdryer on a low-heat setting for 10 seconds to loosen the adhesion.
- Place a piece of tape on top of the pin, then peel it off slowly from the edge.

Please handle with care.

Sharp parts: Pins can cause injury if mishandled.

Not suitable for children – small parts and sharp points may present a choking or injury hazard.

Always secure the clasp or safety cap firmly when wearing.

Avoid contact with skin, eyes, or mouth.

Designed for use on fabric only — do not attach to skin or delicate materials.

If damaged or bent, dispose of safely to prevent injury.

Use responsibly and enjoy your badge safely.

Made in Italy by American company, Sticker Mule LLC.

These custom pins are made from a solid, transparent, acrylic material that is printed in full colour.

They feature a soft PVC clutch, allowing you to fasten your pin to your clothes, backpack, or accessories.

Each custom pin includes a protective film on the front to prevent scratching - please remove this before wearing.

A clear laminate protects the back of the pin and helps reduce chipping. The backside laminate should not be removed.

If you have difficulty peeling the film, we recommend trying one of these methods:
- Rub your finger on the edge to help loosen it.
- Use a hairdryer on a low-heat setting for 10 seconds to loosen the adhesion.
- Place a piece of tape on top of the pin, then peel it off slowly from the edge.

To keep your pin badges looking their best:

Storage: Keep pins in a cool, dry place away from direct sunlight to prevent fading or tarnish.

Cleaning: Gently wipe with a soft, dry cloth. Avoid using water, chemicals, or abrasive cleaners.

Moisture: Do not wear in the shower, pool, or during heavy rain — moisture can cause damage.

Handling: Always close the pin clasp when not wearing to protect both the pin and other items.

Display: If collecting or displaying, use a pin board or fabric backing to avoid scratching surfaces.

Transport: When carrying, secure pins in a small box or pouch to prevent bending or loss.

Proper care helps your badge stay bright, safe, and stylish for years to come.

Our Authorised Representative in the EU is:

Easy Access System Europe

Mustamäe tee 50

10621 Tallinn, Estonia

Email: gpsr.requests@easproject.com

• Change of mind? Return within 14 days of delivery (you cover return postage). We’ll refund you.
• Faulty or damaged? You’re fully covered. We’ll pay return postage and send a free replacement or refund.
  Condition: Items must be returned undamaged and in their original condition.
• See our full Returns Policy HERE